XBEE® Gateway: Connects XBee Devices to Dloud-based Applications over Cellular, Wi-Fi or Ethernet

anewtech-digi-xbee-zigbee-gateway

The XBee Gateway provides a low-cost, programmable solution to connect networks of XBee-enabled devices to IP networks. With a simple, open-source Python development environment, this gateway enables custom applications to run locally while interfacing across existing Ethernet/Wi-Fi/cellular networks for WAN connectivity to cloud-based software applications.

XBee Gateway products can be managed remotely via Device Cloud. Device Cloud allows users to remotely manage thousands of deployed devices, supporting features like remote firmware upgrades and event alarms.

anewtech-xbee-gateway

The XBee Gateway can be tested and developed using the XBee ZigBee Cloud Kit, which fully integrates the XBee Gateway, XBee Module, Device Cloud and a sample web application into a cohesive internet-connected solution. This kit is a powerful tool that enables developers to create internet-connected prototypes in 30 minutes or less.

XBee Gateway Features:
• Secure WAN connectivity for large networks of XBee-based devices
• Open Source Python environment for custom application development on the gateway
• Flexible Cellular, Wi-Fi and Ethernet WAN connectivity options
• Integration with Digi Device Cloud enables remote configuration and management of complete XBee network

For more information about XBee Gateway please contact the following:
Singapore: http://www.anewtech.net, email:contactus@anewtch.com.sg
Malaysia: http://www.anewtech.com.my, email:sales@anewtech.com.my
Vietnam: http://www.anewtech.com.vn, email: sales@anewtech.com.vn

900 MHz OEM RF modules pack maximum power, security and flexibility into the XBee SMT footprint: XBee SX Module

Anewtech-Digi-XBee-SX

XBee SX 900 MHz RF modules are the “muscle modules” of the XBee ecosystem, providing a combination of reliability and redundancy for OEMs building low-power, mission-critical wireless devices. They utilize the DigiMesh® networking protocol, featuring redundant mesh network operation and support for low-power sleeping nodes. Customers that don’t require mesh network architecture can configure the XBee SX to operate in simple point to multipoint mode.

With RF line-of-sight ranges up to 65 miles and strong interference blocking, these modules are ideal for applications requiring the combination of range, data redundancy and data reliability.

Anewtech-zigbee-module-XBee-SX

The XBee SX modules can be configured easily using Digi’s free XCTU software or via Digi’s simplified AT or API command sets. They are pre-certified for use in multiple countries and include integrated antennas, removing the burden of RF development/support costs and enabling fast time to market for OEM designs. The modules provide secure, reliable delivery of critical data between devices with 256-bit AES encryption, and the small XBee surface-mount form factor saves valuable board space.

For more information about ZigBee RF Module please contact the following:
Singapore: http://www.anewtech.net, email:contactus@anewtch.com.sg
Malaysia: http://www.anewtech.com.my, email:sales@anewtech.com.my
Vietnam: http://www.anewtech.com.vn, email: sales@anewtech.com.vn

1 Watt Long-Range OEM RF modules: XTend® 900 MHz

Anewtech-xbee-rf--module-XTend-900-MHz

XTend OEM RF module provides unprecedented range in a low-cost wireless data solution. The module is easy to use, requires minimal power, provides reliable delivery of critical data between devices and is now available in the even smaller XBee Surface Mount form factor to save valuable PCB space.

XTend module utilizes FHSS (Frequency Hopping Spread Spectrum) agility to avoid interference by hopping to a new frequency on every packet transmission or re-transmission. Its transmit power is software adjustable from 100 mW to 1 W—the maximum output power allowable by governments that use 900 MHz as a license-free band.

Anewtech-zigbee-module-XTend-900-MHz

Innovations stamped in its design enable the XTend module to supply two- to eight-times the range of other modules operating within the unlicensed 900 MHz frequency band. The range gained by OEMs and integrators is due to proprietary technologies embedded into each module, including superior RX (receiver) sensitivity, interference immunity, modulation/demodulation techniques and others.

XTend® 900 MHz Features:
– ISM 900 MHz operating frequency
– 100 mW – 1 Watt power output (up to 40 mile range)
– 256-bit AES Encryption
– Available with DigiMesh®
– Available in smaller, lower power XBee Surface Mount form-factor

For more information about ZigBee RF Module please contact the following:
Singapore: http://www.anewtech.net, email:contactus@anewtch.com.sg
Malaysia: http://www.anewtech.com.my, email:sales@anewtech.com.my
Vietnam: http://www.anewtech.com.vn, email: sales@anewtech.com.vn

Wi-Fi version of ZigBee Module: XBee® Wi-Fi

Anewtech-xbee-rf-xbee-wifi

XBee Wi-Fi embedded RF modules provide simple serial to IEEE 802.11 connectivity. By bridging the low-power/low-cost requirements of wireless device networking with the proven infrastructure of 802.11, the XBee Wi-Fi creates new wireless opportunities for energy management, process and factory automation, wireless sensor networks, intelligent asset management and more. Focused on the rigorous requirements of these wireless device networks, the XBee Wi-Fi gives developers IP-to-the-device capability.

XBee modules offer developers tremendous flexibility. The XBee Wi-Fi shares a common footprint with other XBee modules. This allows different XBee technologies to be drop-in replacements for each other; developers can switch from 802.11 to 802.15.4, ZigBee, DigiMesh® and proprietary long-range with minimal development time or risk.Embedded Wi-Fi modules provide ultra low-power 802.11b/g/n communications in the flexible XBee hardware and software footprint

As a member of the XBee family, the XBee Wi-Fi combines hardware with software for a complete modular solution. XBee Wi-Fi modules are designed to communicate with access points in existing 802.11 infrastructures. Developers can use AT and API commands for advanced configuration options.

For more information about ZigBee Module, please contact the following:
Singapore: www.anewtech.com.sg, email:contactus@anewtch.com.sg
Malaysia: www.anewtech.com.my, email:sales@anewtech.com.my
Vietnam: www.anewtech.com.vn, email: sales-vn@anewtech.net

XBee Module: The Most Flexible ZigBee Platform

ZigBee Solutions

ZigBee is the international standard based on IEEE 802.15.4 for a low speed, wireless, personal area network aiming for low power, low cost applications. In addition to its advantage in power consumption and cost, it also provides highly stable communication and it is one of the most rapidly growing technologies recently.

The ZigBee protocol is designed to communicate data through hostile RF environments that are common in commercial and industrial applications. A key component of the ZigBee protocol is the ability to support mesh networking. In a mesh network, nodes are interconnected with other nodes so that multiple pathways connect each node. Connections between nodes are dynamically updated and optimized through sophisticated, built-in mesh routing table.

For more information about ZigBee Enabled Solutions, please contact the following:
Singapore: www.anewtech.net, email:contactus@anewtch.com.sg
Malaysia: www.anewtech.com.my, email:sales@anewtech.com.my
Vietnam: www.anewtech.com.vn, email: sales@anewtech.com.vn