IO-Link: Makes Automation Even More Powerful Than Ever Before

anewtech-automation-io-link

The seamless communication from the sensor to the network is essential for efficient production. Components and infrastructure are required to make information available and transports them across all levels.

IO-Link communicates from the control unit down to the lowest level of automation through an universally applicable standard interface for communication. With IO-Link enabled sensors, I/O hubs and RFID installed on the line, systems can communicate directly to the controller via the network level to guarantee efficiency.

IO-Link comprises sensors and fieldbus technology with an extremely wide range of functional principles. Using fieldbus systems like PROFIBUS, PROFINET, EtherNet/IP, DeviceNet, CC-Link, CC-Link IE and EtherCAT, IO-Link is essential in all areas of automation.

IO-Link advantages:
– Easy to get started, time-saving installation
– Automatic adjustment during operation
– Continuous monitoring

For more information about IO Link please contact the following:
Singapore: http://www.anewtech.net, email:contactus@anewtch.com.sg
Malaysia: http://www.anewtech.com.my, email:sales@anewtech.com.my
Vietnam: http://www.anewtech.com.vn, email: sales@anewtech.com.vn

Special RFID Tags for Non-Metallic Application

anewtech-industrial-uhf-rfidanewtech-industrial-uhf-rfid

The BIS U Identification System is classified as a non-contacting system with read and write functionality for single or multiple UHF tags. This allows it to transport not only programmed information that is fixed on the data carrier (tag), but also to collect and pass on tag information to interfacing control or data collection systems.

Special RFID tags are used for for non-metallic objects in e-Kanban. Assembled individually, these are used in sensitive areas of (intra)logistics or in kanban systems to detect plastic containers or in maintenance work for authentication and access control. Their variants enable individualized use for handling special challenges.

Benefits
• Washable, flexible (bendable): BIS016K, BIS016L
• Omnidirectional detection possible: BIS016M
• Degree of protection up to IP68

For more information about Industrial UHF RFID System please contact the following:
Singapore: http://www.anewtech.net, email:contactus@anewtch.com.sg
Malaysia: http://www.anewtech.com.my, email:sales@anewtech.com.my
Vietnam: http://www.anewtech.com.vn, email: sales@anewtech.com.vn

Work-in-Process (WIP) Tracking with BIS M HF RFID System

anewtech-industrial-hf-rfid

Manufacturing plants utilizing automated assembly have unique requirements when it comes to tracking their work-in-process (WIP). Tracking can also include all the lineage information from all the components used in the final assembly. Most automated manufacturing lines also utilize flexible manufacturing where multiple product versions are made on one line. There are three primary areas of tracking automated assembly in total: Build, Process, and Lineage Information.

The BIS M system uses a High Frequency or HF 13.56 MHz inductively coupled technology along with passive tags to provide mid-range RFID solutions as far as 400 mm. This system is ideal for closer range asset tracking, WIP (work in process) or production control such as palletized production or “on part” tracking and quality traceability applications. This system also offers high temperature, metal mount, hardened and disposable tagging options.

Key ROI Elements
• Enable flexible manufacturing
• Track the rework process
• Effectively handle product recalls
• Maintain regulatory compliance

For more information about HF RFID System please contact the following:
Singapore: http://www.anewtech.net, email:contactus@anewtch.com.sg
Malaysia: http://www.anewtech.com.my, email:sales@anewtech.com.my
Vietnam: http://www.anewtech.com.vn, email: sales@anewtech.com.vn

Industrial HF RFID System: BIS M Industrial RFID Systems

industrial-hf-rfid-system

The BIS M system uses a High Frequency or HF 13.56 MHz inductively coupled technology along with passive tags to provide mid-range RFID solutions as far as 400 mm. This system is ideal for closer range asset tracking, WIP (work in process) or production control such as palletized production or “on part” tracking and quality traceability applications. This system also offers high temperature, metal mount, hardened and disposable tagging options.

industrial-hf-rfid-system-anewtech

The main areas of application for the BIS M HF RFID include internal company logistics, access control and copy protection. The powerful identification system is proven in all applications where lightning-fast data transfer and large read/write distances are required. Select the most suitable BIS M system for your application from the table.

For more information about Industrial HF RFID System please contact the following:
Singapore: http://www.anewtech.net, email:contactus@anewtch.com.sg
Malaysia: http://www.anewtech.com.my, email:sales@anewtech.com.my
Vietnam: http://www.anewtech.com.vn, email: sales@anewtech.com.vn

BIS U Identification System: Industrial UHF RFID Applications

anewtech-industrial-uhf-rfid-systemThe BIS U Identification System is classified as a non-contacting system with read and write functionality for single or multiple UHF tags. This allows it to transport not only programmed information that is fixed on the data carrier (tag), but also to collect and pass on tag information to interfacing control or data collection systems.

Asset tracking
UHF-based RFID provides a means of identifying and tracking assets like tools, production equipment, medical devices, installed parts, logistic containers, and even reusable assets like totes, bins and skids.
UHF RFID SYSTEM - Asset Tracking

Logistics tracking
Tracking incoming and outgoing shipments of parts and products are key to the efficiency and operation of any production facility. UHF-based RFID enables a reliable, non-visual way to identify multiple containers and shipment information quickly and reliably.
industrial-uhf-rfid-system-logistic-tracking

Closed loop and supply chain logistics
When moving parts from suppliers to main production facilities, UHF-based RFID can be a significantly more reliable and a faster way to identify incoming shipments, contents and reusable assets like totes, part containers, skids, and transport containers.

Production tracking
During the production process, RFID can be used to track parts and enable visibility into the process itself. UHF-based RFID can provide a means to track parts or part pallets at greater distances allowing greater freedom of use.

e-Kanban
Electronic Kanban is a messaging system that allows a mix of information and control for the tracking and movement of production components. e-Kanban can be used to provide faster flow of information and replaces traditional elements such as cards with RFID and barcode.
industrial-uhf-rfid-system-e-Kanban

For more information about Industrial UHF RFID System please contact the following:
Singapore: http://www.anewtech.net, email:contactus@anewtch.com.sg
Malaysia: http://www.anewtech.com.my, email:sales@anewtech.com.my
Vietnam: http://www.anewtech.com.vn, email: sales@anewtech.com.vn

BIS U Identification System: Industrial UHF RFID System

anewtech-industrial-uhf-rfid-systemThe BIS U system (UHF RFID System) uses Ultra High Frequency or UHF 865 to 928 MHz propagating wave and back scatter technology along with passive tags to provide very long range RFID solutions as far as 6 m. This system is ideal for asset as well as logistics tracking and identification applications. The BIS U includes high temperature and metal mounted tag solutions as well as combination hardened and disposable tags that can be used to provide the most cost effective and reliable solution.

Operation principles of the system
The BIS U Identification System is classified as a non-contacting system with read and write functionality for single or multiple UHF tags. This allows it to transport not only programmed information that is fixed on the data carrier (tag), but also to collect and pass on tag information to interfacing control or data collection systems.

The main components of the BIS U Identification System are:
Processor
Antennas(s)
Data carrier (tag)
BIS-U-Identification-System

BIS U Identification System Features
• Supports standard EPC Gen 2 tags
• Supports multiple enterprise or control interface options
• Up to four antennas can be used on one controller
• Does not require line of site
• Passive tags require no batteries

BIS U Identification System Benefits
• Tags available for any asset no matter how large or small and regardless of material
• Integration into most current system
• Multiple antennas provide redundant, reliable data
• Identifies multiple assets without having to scan each item separately
• Low cost passive tags ensure cost effectiveness, or durability, and longevity
• No battery replacement needed

For more information about Industrial UHF RFID System please contact the following:
Singapore: http://www.anewtech.net, email:contactus@anewtch.com.sg
Malaysia: http://www.anewtech.com.my, email:sales@anewtech.com.my
Vietnam: http://www.anewtech.com.vn, email: sales@anewtech.com.vn

Vision-based Identification: BVS Vision Sensor – As Simple as a Sensor

Anewtech-BVS-E-Vision-SensorsBVS Vision Sensor is the perfect choice to insure a reliable, flexible and productivity increasing vision-based quality solution. The BVS offers a full tool box of advanced machine vision functions that can be combined to reliably solve error proofing, quality checking and barcode reading applications. With the BVS, recognizing defects on multiple part types early in the production process is possible using the same sensor. In-process inspection job changing eliminates sensor arrays and complex costly hardware, increasing reliability and quality while reducing overall costs.

There are four different type vision sensors available:

BVS-E Identification
Anewtech-BVS-E-Vision-Sensors-IdentificationIdentification vision sensor easily and reliably read a large number of codes, check the marking on products. Regardless of whether 1D codes (barcodes) or 2D codes (Data Matrix codes), the BVS reads all common codes on the market. Text and sequences of numbers such as code plain text can be verified using OCV. The result: “Inspection OK” or “Inspection not OK”. User can output it via the RS232 or Ethernet interface, to view the read code data to find out which parts are being processed.

BVS-E Standard
Anewtech-BVS-E-Vision-Sensors-standardStandard vision sensor is a sensor of choice for simple error proofing tasks, inspects and monitors production process. Choose the correct tool for application from a large selection and set up inspection. If different components are used, activate the relevant inspection via the PLC control to allow production to continue seamlessly without requiring a teach-in/setup process.

BVS-E Advanced
Anewtech-BVS-E-Vision-Sensors-AdvancedIn addition to the standard functions of the BVS-E, the advanced vision sensor also monitors the rotational position. It can detect objects regardless of the location and position. Productions can be monitored more efficiently through shorter process times and the option of using logical functions to combine individual checks.

BVS-E Universal
Anewtech-BVS-E-Vision-Sensors-UniversalThe application range of the BVS Universal includes part presence checks, reading and verifying codes to demanding part positioning applications. The new powerful 360° contour match tools allow for the locating, verifying and counting of rotated parts in application. The detected part location can then be transmitted to a PLC or Robot using the built in communication interface.

For more information about Vision Sensor please contact the following:
Singapore: http://www.anewtech.net, email:contactus@anewtch.com.sg
Malaysia: http://www.anewtech.com.my, email:sales@anewtech.com.my
Vietnam: http://www.anewtech.com.vn, email: sales@anewtech.com.vn