Embedded Storage 3ME3 Series: High IOPS with DRAM-less Design

anewtech-industrial-embedded-flash-storage

Embedded storage series 3ME3, is the perfectly upgrade from the industrial 3ME series. The 3ME3 offers an outstanding 25,000 IOPS 4K random read and write all without an external DRAM buffer. The DRAM-less design not only prevents data loss from sudden power failure, but also makes for an even more compact form factor SSD, saving you precious space in your embedded system.

The 3ME3 series is designed with an innovative flash algorithm and uses the latest synchronous NAND Flash IC to enhance disk performance in both sequential and random data transfers.

anewtech-embedded-flash-storage-3me3

Features
• DRAM-less, 100% data integrity even in the event of power failure
• High random IOPS to enhance boot up times and general IO performance
• Enhanced performance with innovative firmware algorithm
• Supports TRIM, NCQ, and SMART
• Supports data integrity in the event of abnormal power failure with iData Guard technology
• Wide operating temperature range from -40°C to 85°C

For more information about Embedded Flash Storage please contact the following:
Singapore: http://www.anewtech.net, email:contactus@anewtch.com.sg
Malaysia: http://www.anewtech.com.my, email:sales@anewtech.com.my
Vietnam: http://www.anewtech.com.vn, email: sales@anewtech.com.vn

SATA III Embedded Flash Storage for Aerospace and Defense Applications

 2.5-inch SSD, 1.8-inch SSD, SATA Slim and mSATAThe SATA III embedded flash storage products available in various form factors, including: 2.5-inch SSD, 1.8-inch SSD, SATA Slim and mSATA. The products are speedy, rugged, with smart data protection technology and military grade data security.

With sequential read and write speeds of up to 510/340 MB/s, double of SATA II devices, SATA III storage devices are ideal for rugged, high-speed and low-latency data streaming military applications such as radar, sonar, signal intelligence and image processing. The flash storage products are MIL-STD-810F/G compliant, for operating in extreme environments

iCell is vital for mission-critical applications, where working under extreme conditions and without backup power is unavoidable. This technology provides a mechanism to instantaneously discharge data stored in temporary volatile DRAM buffers to flash storage, to ensure the safety of data during power failures.

For more information about Embedded Flash Storage please contact the following:
Singapore: http://www.anewtech.net, email:contactus@anewtch.com.sg
Malaysia: http://www.anewtech.com.my, email:sales@anewtech.com.my
Vietnam: http://www.anewtech.com.vn, email: sales-vn@anewtech.net

SATA III Industrial Flash Storage: 2.5″ SSD, SATADOM, SATA Slim, mSATA, and CFast

SATA III Industrial Flash Storage: 2.5" SSD, SATADOM, SATA Slim, mSATA, and CFast

Anewtech’s complete line up of industrial SATA III embedded flash storage products includes 2.5″ SSD, SATADOM, SATA Slim, mSATA, and CFast, available in a wide variety of form factors and interfaces. With SATA III, storage devices now offer sequential read and write speeds up to 500/340MBps – about two times faster than SATA II – to satisfy almost any embedded systems requirement.

The SATA III supports even wider temperature ranges, customized firmware, power outage data protection and other advanced functions. With these new features, Anewtech is moving the industrial PC application market forward into the next generation. The upgraded SATA III 2.5-inch SSDs provide a lower power design and reduced operating costs with enhanced power saving slumber and sleep modes.

Additional features include ATA security to keep critical data safe and TRIM command support to further extend drive life by avoiding unnecessary write operations. The operating temperature has been extended to a new range, from -20°C to 85°C.

For more information about Embedded Flash Storage, please contact the following:
Singapore: www.anewtech.net, email:contactus@anewtch.com.sg
Malaysia: www.anewtech.com.my, email:sales@anewtech.com.my
Vietnam: www.anewtech.com.vn, email: sales-vn@anewtech.net

Low-porfile SATADOM ideal for 1U Server Applications

SATADOM-D150QV-L-anewtechSATADOMs D150QV and D150QV-L series are being selected as the preferred boot device on the SATA port. SATADOM has up to 8 times the performance of normal USB drive (135MB/sec and 116MB/sec Read/Write versus 15MB/sec and 10MB/sec for USB).

The D150QV-L´s low profile form-factor makes it the ideal solution for 1U and 2U server applications. SATADOMs designed with SLC NAND Flash, deliver the highest endurance for various performance demanding and mission critical applications.

SATADOM D150QV-L module offers both Standard Grade (0C~+70C) and Industrial Grade temperature (-40C~+85C), SMART function (monitoring the life-cycle of the product), and Power Pin 7 design. SATADOM is currently the smallest Flash storage device with high density of up to 64GB (SLC) capacity. It has cable-less (power pin 7), lower power consumption and small form-factor designs for very low-profile (1U blade server) applications. In addition, users will also have the benefits of customized firmware and controller as well as fixed BOM (Bill of Materials), making SATADOM the best substitute industrial storage solution for HDD, SSD, and USB.

SATADOMs are more reliable and durable than traditional HDD and USB, and it uses 80% less power than HDD. Combined its excellent form-factor designs and easy installation (plug & play), make SATADOM the most powerful & energy-efficient storage solution for 1U, 2U server applications.

For more information about SATADOM storage, please contact the following:
Singapore: www.anewtech.com.sg, email:contactus@anewtch.com.sg
Malaysia: www.anewtech.com.my, email:sales@anewtech.com.my
Vietnam: www.anewtech.com.vn, email: sales-vn@anewtech.net

Embedded Flash Storage for Industrial & Embedded Applciations

Embedded Flash Storage
Anewtech provide full range of industrial flash storage products which are available in different interfaces such as: Disk-on-Module (DOM), Flash Card, or Solid State Drive (SSD) with PATA, SATA and even native PCI express transfer protocols. In order to keep data integrity and extend flash lifespans, protection mechanisms such as Power Failure Protection and Global Wear-leveling algorithms were implemented to the entire product series.

SATA Module
SATA module offers four models, including SATADOM, mSATA, SATA Slim, and CFast. All the four types are appealed to compact size and, at the same time, fulfill low power consumption that is a concern for industrial/embedded systems.

Industrial Solid State Drive (SSD)
Designed for rigorous and mission critical environment, industrial SSD series, both SATA and ATA SSD support wide temperature (-40°C ~ +85°C) and the capacity is up to 256GB.

Embedded Disk Card and Industrial CompactFlash (EDC and iCF)
EDC/iCF 8000 series are the best-in-class 4-channel embedded solid-state data storage systems, offering high sustained read and write speed up to 80 MB/sec. and 75 MB/sec. with fully support of UltraDMA modes.

For more information about Embedded Flash Storage, please contact the following:
Singapore: www.anewtech.net, email:contactus@anewtch.com.sg
Malaysia: www.anewtech.com.my, email:sales@anewtech.com.my
Vietnam: www.anewtech.com.vn, email: sales-vn@anewtech.net